Stylish enough for the boardroom yet tough enough for the great outdoors, our Flat Cut Metal Letters and Logos are made true, from high-grade plate metal.
From prime Aluminum, to Stainless Steel, to Bronze, to Brass, Copper, and Core-Ten® steel, we offer the widest range of metal alloys, finishes, and gauges. More choices - more options for you.
Most Flat Cut Metal orders are manufactured and shipped within 7 to 10 days from a regional facility near you - even custom produced per your art.
These hand-finished pieces are entirely manufactured in-house for quality assurance and tested to last a lifetime or we’ll replace it, free.
Larger sizes typically require larger letter thickness. Below are our standard sizes. Please contact us for larger sizes.
Aluminum: ⅛”–1” deep, ½”–46” high
Bronze: ⅛”–1/2” deep, ½”–46” high
Brass: ⅛”–3/4” deep, ½”–46” high
Copper: ⅛”–3/8” deep, ½”–40” high
Steel: ⅛”–1/2” deep, ½”–46” high
Bronze
Bronze
Bronze
Bronze
Bronze
Bronze
Brass
Brass
Brass
Brass
Copper
Copper
Copper
Copper
2108
All Gemini products are guaranteed for life.
Our flat aluminum letters & logos contain 20% recycled materials and 100% of our internally generated scrap is recycled. Download our certificate.
Our Stainless Steel Letters & Plaques contain 28-40% recycled materials and 100% of our internally generated scrap is recycled. Download our certification.
Our Cor-Ten® Steel Products contain 77% recycled materials and 100% of the internally generated scrap is recycled. Download our certification.
Flat Cut Bronze Letters & Plaques contain 60-75% recycled materials and 100% of the internally generated scrap is recycled. Download our certification.
Our Flat Brass Letters & Plaques contain 60-75% recycled materials and 100% of our internally generated scrap is recycled. Download our certification.
Our Copper Letters & Plaques contain 60-75% recycled materials and 100% of the internally generated scrap is recycled. Download our certification.
Wind Load calculations for Gemini Cast & Flat Cut Metal Letters and Logos.
Architectural specifications for Gemini Flat Cut Metal letters & logos.
Letter visibility chart to size letters for optimal viewing distance.
Specification guide for Gemini metal letters
General maintenance recommendations for Gemini Flat Cut Metal letters and logos.
Product drawing of Gemini's Flat Cut Metal with Plain Mount
Product drawing of Gemini's Flat Cut Metal with a Stud Mount.
Product drawing of Gemini's Flat Cut Metal with Welded Stud Boss
Product drawing of Gemini's Flat Cut Metal with a Top Stud Mount.
Product drawing of Gemini's Flat Cut Metal with a Bottom Stud Mount.
Product drawing of Gemini's Flat Cut Metal with Top and Bottom Stud
Product drawing of Gemini's Flat Cut Metal with a Double Rail Mount
Product drawing of Gemini's Flat Cut Metal with a Single Rail Mount
Product drawing of Gemini's Flat Cut Metal with a Bottom Rail Mount
Product drawing of Gemini's Flat Cut Metal with a Top Rail Mount
Product drawing of Gemini's Flat Cut Metal with Bottom Angle Bracket
Product drawing of Gemini's Flat Cut Metal with Double Face Tape
Letters and logos are supplied with no mounting holes or hardware. (view drawing)
Backs of letters and logos, at least ¼”thick, are drilled and tapped to receive threaded studs, for mounting to wall. (view drawing)
Backs of 1/8”thick letters and logos are supplied with welded stud bosses (to receive studs) or 1” long welded studs, for mounting to wall. (view drawing)
Top returns of letters and logos, at least 3/8”thick, are drilled and tapped to receive threaded studs, for mounting to wall or rail. (view drawing)
Bottom returns of letters and logos, at least 3/8”thick, are drilled and tapped to receive threaded studs, for freestanding letters. Tie-backs (not supplied) are recommended for letters over 8”high. (view drawing)
Top and bottom returns of letters and logos, at least 3/8”thick, are drilled and tapped to receive threaded studs, for mounting to wall or rails. (view drawing)
Backs of letters and logos, at least ¼”thick, are drilled and tapped to receive screws to secure letters onto two horizontal metal rails (bars or C-Channel) - for mounting to wall. (view drawing)
Backs of letters and logos, at least ¼”thick – up to 4”high, are drilled and tapped to receive screws to secure letters onto one horizontal metal rail (bars or C-Channel) - for mounting to wall. (view drawing)
Bottom returns ofletters and logos, at least 3/8”thick, are drilled and tapped to receive screws to secure letter onto one metal rail (bars or C-Channel) - for freestanding letters. Tie-backs (not supplied) are recommended for letters over 8”high. (view drawing)
Top returns ofletters and logos, at least 3/8”thick, are drilled and tapped to receive screws to secure letters onto one metal rail (bars or C-Channel) - for free-hanging letters. Tie-backs (not supplied) may be required for letters over 8”high. (view drawing)
Lower backs ofletters and logos, at least 3/8”thick, are drilled and tapped to receive screws to secure letters onto one metal angle iron - for freestanding letters. Tie-backs (not supplied) are recommended for letters over 12”high. (view drawing)
Installation Instructions: How to use install small Flat Cut Metal Letters with no mount (plain).
Installation Instructions: How to use a Mounting Pattern to install Flat Cut Metal Letters & Logos with a Stud Mount.
Installation Instructions: How to use a Mounting Pattern to install Flat Cut Metal Letters & Logos with a Welded Stud Mount.
Installation Instructions: How to use a Stencil Template to install small Flat Cut Metal Letters & Logos with a Double Faced Tape Mount.
Installation Instructions: How to use a Mounting Pattern to install Flat Cut Metal MINI Letters with a Stud Mount.
Installation Instructions: How to use a install Flat Cut Metal MINI Letters with a Plain Mount.
Not all drawings & install templates available for all products.
Where to Buy Gemini
